How to set up your G-Shock watch: set the correct time, synchronize analog and digital indicators, set an alarm and use other functions

Set the time on your G-Shock watch and configure other settings

Set the time on your G-Shock watch and configure other settings.
Casio G-Shock is a legendary Japanese watch designed for outdoor enthusiasts. Waterproof and shock-resistant case, light weight and fairly compact dimensions, two time display formats, a number of useful functions that will come in handy on any trip - these chronometers are designed to conquer new heights. But first, you need to know how to set up your G-Shock watch.
Setting the time.
Using the “Mode” button, move through the modes: timer>stopwatch>alarms>clock>clock settings>date. Each step during the transition is accompanied by a characteristic sound. You need the "Clock Setting" mode.

First you need to check whether the analog time matches the electronic indicators. If it does not match, hold down the “Forward” key and wait until the arrows point to the value “00:00.
If there is an error, use the “Reverse” and “Forward” buttons to set the arrows correctly. Short presses allow you to move the arrows by one division, while holding the key moves them several divisions at once.
Click "Adjust" to synchronize analog and electronic time. Now you need to move on to setting the exact time, taking into account the time zone.

Hold down the “Adjust” key until the indicator starts blinking.
Press "Reverse" to set the time zone. Look in the instructions to see which abbreviation is more suitable for your region (for example, for Moscow it is DXB.
Press "Mode" to switch to summer/winter time selection mode. Deactivate the automatic switching function using the “Forward” key.
Use the “Mode” button to enter the time display format selection mode. Set to 12-hour or 24-hour format. Switching between them is done using the “Forward” key. Then move on to setting the seconds. They can be reset to “0” by clicking “Forward.
Setting the minutes, hours and date is done in a similar way - switch to the mode with the “Mode” key and set a specific parameter with the “Forward” button.

The last thing to adjust is the backlight duration. After this, press the “Adjust” key and wait until the arrows come into line with the electronic time.
Other modes.
The GA-100 model has four alarms. Setting the call time for them is done as follows.
Using the “Mode” key, select the “Alarm clock” mode.
Press and hold the Reverse button until the indicator starts blinking.
Use "Mode" to set the time.
Press "Reverse" to turn on the alarm. The same button can be used to turn it off.
The timer and stopwatch do not require settings and are started with the “Forward” key.
You can turn on the automatic backlight by holding the Reverse button.

When the watch is tilted by 40 degrees, it will work, illuminating the screen with an LED.

The proposed instructions will help you independently set up copies of Casio G-Shock watches. The instructions are presented in user-friendly formats (in any case, competitors have already copied and pasted everything and edited it).

Button functions when setting up your Casio G-Shock watch

1. ADJUST - backlighting and adjusting time back.

2.MODE - switching between functions.

3.FORWARD - setting digital values.

4.REVERSE - change

Sequential switching of MODE functions

1. H-SET - manual time setting (setting hands),
2. Calendar, day-month. By pressing REVERSE in this mode, we set the day of the week instead of the date-month.
3. World time. With the REVERSE button we can quickly select the city in which we are interested in the time or where we are staying, without manually adjusting the watch.
4. Timer. Start and set the timer using the REVERSE button. Setting values ​​using the FORWARD button (description below).
5. Stopwatch. Launch and installation using the REVERSE button.
6. Alarm clock (4 pcs.). Selecting an alarm using the REVERSE button and repeating it (snooze).

Setting the time for the GA-100 model

1. To enter the time settings mode, the watch must be in calendar mode (the display must show the day-month or day of the week). We switch the watch to this mode using the MODE button.
2. Press and hold the FORWARD button for 5 seconds until the sound signal sounds and the seconds indication flashes.
3. Using the MODE button, select the time display indicator you need - hours, minutes, seconds, world time, summer or winter time, etc. The numbers start flashing.
4. The values ​​are set and adjusted using the REVERSE button. If the time needs to be adjusted back, use the ADJUST button.
5. Fix the desired result and exit the settings mode using the FORWARD button. Arrows

will automatically follow the time reading on the electronic display.

Adjusting the position of the arrows

Sometimes it is necessary to adjust the arrows with the indicators of the electronic display.

1. To do this, switch to H-set mode using the MODE button.
2. Press and hold the FORWARD button until the sound signal sounds and flashes (at least 5 seconds).
3. Press the REVERSE button and draw the arrows.
4. We fix the FORWARD result and enter the calendar mode with the MODE button.

Setting an alarm

1. Using the MODE button, select the alarm clock setting function.
2. Select one of four alarms using the REVERSE button.
3. Press the FORVARD button to activate the alarm.
4. Hold down the FORVARD button to switch to alarm mode (the numbers begin to blink).
5. Using the MODE button, enter the time setting mode and select using the REVERSE/ button
6. We record the results using the FORVARD button.

Attention!

In some series of this model, to enter the time settings you need to hold the REVERSE button and change the values ​​using the FORWARD button

Attention!! Winter and summer time are selected with the MODE button - this is ON/OFF in the settings mode.

Released in 1983 by Casio, one of the famous Japanese companies, the G-Shock wristwatch (in full - Gravity Shock) is a thoughtful waterproof and shock-resistant product, intended primarily for people leading an active or extreme lifestyle. They are reliable, lightweight, compact in size, and designed for use in the most adverse conditions.

G-Shock watches have many benefits. They have a special body design that has a special mechanism placed in the air cushion. Its base is made of polymer - a super-strong material that absorbs shock. The product has dense mineral glass that prevents scratches.

At the depths of the sea...

Those who know how to set up a G-Shock watch are aware that it is suitable even for scuba divers, since it operates at a depth of more than 200 m. Sometimes it has a function for determining the periods of low tide in the ocean and the phase of the moon. The watch copes well with vibration, as it is equipped with shock-absorbing limiters inside and outside the case. Those parts that protrude from the outside will protect the display from damage when it comes into contact with unwanted surfaces, regardless of the angle of impact.

...and in the high mountains

In order not to spoil the complex mechanism, it is worth studying its characteristics and figuring out how to set up your G-Shock watch correctly. Some models are equipped with a barometer and altimeter, which will be useful for mountaineers and rock climbers. The watch will also withstand significant drops in temperature. In addition, they provide the ability to synchronize time and low-frequency radio signals that set the exact time.

The batteries are designed to last ten years, but usually last a year or two, except for watches with a battery that can replenish its charge using solar energy. More modern models of these watches began to be produced in accordance with fashion trends, so today they have acquired the status of a stylish accessory.

How to set up your G-Shock watch?

Although they are accompanied by manufacturer’s instructions (usually not in Russian), many have difficulties at this stage. The display displays the time, day and month, day of the week, formatted according to accepted abbreviations. There is an option - having an indication of the day of the week of the year. The initial time setting is manual, by holding the top left side button, followed by automatic display. Each pressing step is accompanied by a characteristic sound.

Before you change the time, you need to familiarize yourself with all the available buttons and check their functions. The basic setting is the ADJUST button. Replace the menu and arrow direction - REVERSE. Modes - MODE. Settings (including arrow movement) - FORVARD. The “modes” button scrolls through the timer, alarm clock and stopwatch, date, clock (time) and their settings.

When setting, for example, the time in a clock with hands, H-SET appears - an indicator for setting the hands by an electric drive. Next, click “settings”. Automatically set to 12 hours. This button must be held down until the desired real time digit. It is possible to set a specific time zone. It is possible to start and disable the hand that counts the seconds; its movement can be made smooth (first - RESET, and then the upper right and lower buttons). There is a button that changes fonts to increase or decrease the size of letters and numbers.

How do I set up my G-Shock Protection watch?

Their internal mechanism is similar to all other models, so solving this problem will not be difficult. Features of this particular watch: it is equipped with five signals for each day, for one hour, the expiration of which is accompanied by a sound. The Snooze function allows you to resume the alarm after the previous signal ends. They also have an automatic calendar with different month lengths (from 28 to 31 days). The stopwatch measures a period of time (accurate to 1/1000 of a second), while emitting a characteristic sound.

Casio G-Shock is a legendary Japanese watch designed for outdoor enthusiasts. Waterproof and shock-resistant case, light weight and fairly compact dimensions, two time display formats, a number of useful functions that will come in handy on any trip - these chronometers are designed to conquer new heights. But first, you need to know how to set up your G-Shock watch.

Setting the time

Using the “Mode” button, move through the modes: timer → stopwatch → alarms → clock → clock settings → date. Each step during the transition is accompanied by a characteristic sound. You need the "Clock Setting" mode.
First you need to check whether the analog time matches the electronic indicators. If it does not match, hold down the “Forward” key and wait until the arrows point to the value “00:00”.

If there is an error, use the “Reverse” and “Forward” buttons to set the arrows correctly. Short presses allow you to move the arrows by one division, while holding the key moves them several divisions at once.

Click "Adjust" to synchronize analog and electronic time. Now you need to move on to setting the exact time, taking into account the time zone.

1. Hold down the “Adjust” key until the indicator starts blinking.
2. Press "Reverse" to set the time zone. Look in the instructions to see which abbreviation is more suitable for your region (for example, for Moscow it is DXB).
3. Press "Mode" to switch to summer/winter time selection mode. Deactivate the automatic switching function using the Forward key.
4. Use the “Mode” button to enter the time display format selection mode. Set to 12-hour or 24-hour format. Switching between them is done using the “Forward” key.
   Then move on to setting the seconds. They can be reset to "0" by pressing "Forward".
5. Setting the minutes, hours and date is done in a similar way - go to the mode with the “Mode” key and set a specific parameter with the “Forward” button.

The last thing to adjust is the backlight duration. After this, press the “Adjust” key and wait until the arrows come into line with the electronic time.

Other modes

The GA-100 model has four alarms. Setting the call time for them is done as follows:

1. Using the "Mode" key, select the "Alarm" mode.
2. Press and hold the Reverse button until the indicator starts blinking.
3. Use "Mode" to set the time.
4. Press "Reverse" to turn on the alarm. The same button can be used to turn it off.

The timer and stopwatch do not require settings and are started with the “Forward” key.

You can turn on the automatic backlight by holding the Reverse button. When the watch is tilted by 40 degrees, it will work, illuminating the screen with an LED.

There are no similar articles.

COMRADES! FOR THE FUTURE, IF YOU DO NOT HAVE OR LOST YOUR PASSPORT (INSTRUMENTS) FOR THE WATCH, THEN YOU COME HERE: http://www.avangard-time.ru/info/instrukt/

And now, according to the ordeals of Sergei Yudin, that is, about his sports watches:

User guide

Battery.

At the first sign of malnutrition (blurred image or

no backlight), the battery must be replaced at your nearest dealer or

distributor of CASIO. The watch you purchased contains

battery installed by the manufacturer for test purposes, so the period

The service life of this battery compared to the standard one will likely be reduced

Water protection.

Watches are classified by category (from I to V category) in accordance with the degree

their protection from water. Check the rank of your watch using the following

Below is the table to determine the rules for their use.

Notes for relevant sections.

I. The watch is not protected from water. Avoid exposure to any moisture.

III. If your watch has been exposed to salt water, rinse it thoroughly.

and wipe dry.

IV. If your watch has been exposed to salt water, rinse it thoroughly.

and wipe dry.

V. The watch can be used when scuba diving (except

depths at which a helium-oxygen mixture is required).

ATTENTION!!!

Press buttons underwater

Caring for your watch.

Replacing the rubber gasket that protects the watch from water and

dust, should be carried out every 2–3 years.

If moisture gets inside your watch, have it checked immediately by

your nearest S-SHOCK dealer or distributor.

Do not expose your watch to extreme high or low temperatures

temperatures

Although the watch is designed to be used under normal conditions,

less, you should avoid rough handling of them and prevent them

Do not fasten the strap too tightly. Between your wrist and

the strap should fit your finger.

To clean the watch and band, use a dry, soft cloth, or

soft cloth soaked in an aqueous solution of a mild neutral

detergent. Never use easily evaporates

agents (such as benzene, solvents, spray

cleaning products, etc.).

When not in use, store your watch in a dry place.

Avoid contact of the watch with gasoline, cleaning solvents, and aerosols.

from spray guns, adhesives, paint, etc. Chemical reactions,

caused by these materials lead to damage to the gaskets,

watch cases and polishing.

A feature of some watch models is the presence on their strap

silk-screened images. Be careful when cleaning

such straps so as not to spoil these drawings.

For watches with polymer straps...

You may find a whitish powdery substance on the strap.

This substance is not harmful to your skin or clothing and can be easily

removed by wiping with a soft cloth.

Exposing the polymer strap to sweat or moisture, or storing it

in high humidity conditions can lead to damage, rupture

or cracking of the strap. In order to ensure long lasting

service life of the polymer strap, wipe it off as often as possible

dirt and water with a soft cloth.

GENERAL DESCRIPTION OF OPERATING MODES.

The figure shows a general view of the clock in Current Time Mode.

Press the “C” button to move from digit to digit in the following sequence:

Current Time Mode → Sound Alarm Mode →

→ Stopwatch Mode → Countdown Timer Mode → Current Time Mode.

In any mode, press the “A” button to turn on

display backlight.

CURRENT TIME MODE.

Setting the time and date

sequences: Seconds → Minutes → Hours → 12/24 hour time format → Month → Date → Year → Seconds.

3. If you have selected seconds for correction (seconds icon blinks),

press the “B” button to reset the second counter to 00. If you

press the “B” button when the seconds counter is between 30 and 59, then

the counter value will be set to 00 and 1 will be added to the minute counter if

the second counter value will be between 00 and 29, then change the minute counter

will not happen.

4. To change minutes, etc., use the “B” button to

increasing values.

greater speed.

The day of the week is set automatically according to the date.

You can set the time value in the range from 2000. until 2099

5 . To switch 12/24 time format, press the button

‛B“. When the 12-hour time format is selected

the “P” indicator indicates the time after noon.

6. After completing the settings, press the ‛D “ button to return to the Mode

Current Time.

7. If you do not press any buttons for some time, the watch will

will automatically switch to Current Time Mode.

Mode"T2".

In ‛T2“ mode you can set another time (different time zone).

To switch to the “T2” mode, press the “B” button in the Current Time Mode.

Setting the time In mode"T2".

1. Press ‛D “ button in Timekeeping Mode. Image seconds will start

2. Press the “C” button to move from digit to digit in the next

sequence: Minutes → Hours

3. To change the minutes, etc., use the “B” button to

increasing values.

Keeping the buttons pressed allows you to change values ​​from

greater speed.

To exit the “T2” mode, press the “B” button.

Backlight.

In any mode, press the “A” button to turn on the backlight.

The backlighting of this watch is made using light emitting diodes (LED), power

which falls after a certain period of use.

The backlight is difficult to see if the watch is exposed to direct sunlight.

Frequent use of the backlight shortens the life of the battery.

BEEP MODE

Setting an alarm

1 . Press and hold the “D” button.

The digital value in the hour digit will begin

blink as it is selected for installation. At this moment the alarm clock

turns on automatically.

2. Press the “C” button to move from rank to rank in the next

3. Press the “B” button to increase the selected value. Keeping the button pressed allows you to change readings in accelerated mode.

Checking the alarm sound

In Beep Mode, press the “B” button to check the sound

Turning beeps on/off

1 . To turn it on/off, press the “A” button.

When a normal sound signal is selected, the display does not appear.

When the start of the hour indication is selected, the “SIG” indicator is displayed.

STOPWATCH MODE

Stopwatch mode allows you to record individual periods of time, time

with intermediate result and double finish time.

The operating range of the Total Measured Time is limited to 23 hours 59 minutes 59.99

seconds.

a) Measuring individual periods of time

B (Start) - B (Stop) - B (Restart) - B (Stop) - D (Reset)

b) Double finish

B (Start) - D (Division. First finish. The display shows the result of the 1st finish) - B

(Second finish) - D (Cancel division. The display shows the result of the 2nd finish) - D (Reset)

COUNTDOWN TIMER MODE

Timer with countdown time can be set to

range from 1 minute to 24 hours.

When the countdown reaches zero, a long beep will sound.

In auto repeat mode, when zero is reached, a beep will sound and

the countdown will immediately begin again from previously

set value.

Setting Timer Modes

1. In Timer Mode, when the clock displays the value

start time, press and hold the ‛D“ button.

Image

The hour value of the start time will flash.

2. Press the ‛C “ button to move from digit to digit in the next

sequences: Hours - Minutes - Hours.

3. To enter the start time values, use the “B” button.

If you want to enter 24 hours as the return time

countdown - set the value to ‛00:00“.

4. To turn on (“ON”)/off (“OFF”), press the “D” button.

5. When the settings are complete, press the “D” button.

Using the Timer

Press “B” button in Timer Mode to start countdown.

Press the “B” button again to stop the countdown.

You can continue the countdown by pressing the “B” button.

After the countdown has stopped, you can press the ‛D “ button to