The system graphical interface has encountered an error Android, what should I do? This can happen to any device running the Android operating system. You launch any application, the message immediately appears "An error occurred in the system GUI application" or the error is cyclical, that is, it appears constantly, immediately after closing.
Probably everyone understands what a graphical interface application is and what its essence is. Just in case, let’s clarify that this is the shell through which we control smartphones/tablets. All these beautiful buttons, menu items, etc., by tapping on which we perform various tasks using our gadgets - this is the graphical interface.
An error may occur in the following cases:
It’s clear why this error appears, now you need to decide how to eliminate it. First, remember, perhaps it arose precisely after you installed some application. Then you should simply uninstall it, reboot your tablet/smartphone on Android Lollipop and check whether the problem is gone or not.
By the way, the Beeline store has a lucrative offer related to good smartphone- Meizu M5c.
Sometimes, the error was resolved by removing the memory card from the device. To do this, you should turn off the device, remove the card, turn it on and check whether the error remains or not.
If the previous options did not help, then all that remains is to return the device settings to those that were set at the factory. All data stored in the internal memory smartphone/tablet (not on a memory card). To do this you need:
If you can’t use the Android interface at all due to a pop-up error, the only way out is to go to Recovery Mod and do a reset through it. How to enable this mod? Turn off the device, then hold down the Volume + button and the Power button.
Please note that on some devices, entering this menu is different.
When the menu opens, select "Wipe data/Factory reset". Control occurs using the volume buttons + (select) and – (confirmation).
If things are really bad, nothing can be done, then there is only one option - flashing. Use stock firmware, that is, factory firmware. Instructions on how to do this can be found on the official website of the device manufacturer (not always) or on the 4pda forum.
You spent a lot of time, but nothing worked, is the error still appearing? It’s better to go to a repair shop, where professionals will determine exactly what’s wrong and help fix the problem.
Software errors in the Android operating system occur quite often; most users find unpleasant moments in use. Today’s article is devoted to the problem of the operating system in which the message “ system graphical interface error". Over the course of the article, we will look at possible problems, and then we will give advice on how to eliminate this problem.
After collecting information from various Internet resources, we identified common causes of the error.
Now that we’ve sorted out the reasons, let’s talk about ways to resolve the conflict. Try to remember whether the error appeared after installing an application or whether it popped up “suddenly”.
If the message appears after installing the software, we recommend the following operations:
When a GUI crash is caused by a virus, the situation becomes more complicated; everywhere they immediately advise general reset to factory settings - this helped few people and here's why.
Master reset - will return the smartphone configuration to factory settings. In other words, all third-party programs and information will be deleted. The theme, language and account settings will be reset. When malware penetrates the device, it deletes some files embedded in the system, system files. By performing a master reset, you will roll back the settings, but the deleted files will not be restored.
Reflashing is a 100% proven way to combat this problem. Mentally come to terms with the fact that you will have to delete all your data; first save your contacts, photos, and music.
Do not do it " backup applications", the virus will remain in the infected files.
Applications and games can be easily downloaded in a couple of hours from the Play Market.
If you have recovery installed on your phone, flash it from there. To get into recovery with the phone turned off, you need to hold down the “volume +” and power button. When the menu opens, use the volume keys to select and activate the item “ Wipe data/Factory Setting«.
If the words recovery and firmware are not familiar to you, there is a lot of information on the Internet for any phone; you should flash it with caution so as not to turn the phone into a brick. If you don’t have the time or knowledge to dig, entrust this matter to professionals or a service center.
I hope you have figured out the reasons why the system’s graphical interface application crashes and know how to fix the situation. If you know proven ways to resolve this conflict, write in the comments, we will definitely add them to our article, ask questions.
A short video on troubleshooting for 5 versions of Android firmware, test for your system:
(16
ratings, average: 4,50
out of 5)
Discussion: 11 comments
I can't see the icon indicating the problem. I can't perform any function on the tablet.
Answer
System interface. I'm trying to clear the cache, the command is not executed. What could be the reason?
Answer
Does it give an error or just nothing happens?
Answer
I take a screenshot, it turns out to be a photo with an error message, the screen goes dark and flashes to the “initial stage” of the lock screen.
Answer
Let's see what we can find on this matter. Is the problem still relevant?
Recently, Samsung began distributing an over-the-air operating system update for the Galaxy S7 and S7 Edge to version , and immediately user complaints about a new error in the operation of smartphones began to appear online - " System UI app has stopped"(sometimes "The com.android.systemui process has stopped"). The exact cause of the error has not yet been determined - it can be equally likely due to firmware problems and a number of other factors.
Owners of gadgets, both old and new generation operating systems Android, they encounter errors like: “the application has stopped.” In the English version it sounds: “Unfortunately, the process has stopped.” The malfunction affects many gadgets from well-known manufacturers: Samsung, Huawei, Lenovo, Sony Xperia, LG, Xiaomi and others.
The error may appear in third-party (user-installed) or system (pre-installed) applications. The following actions depend on which application and in what situation throws the error. If the notification appears with some frequency or when you launch a program you have installed (Viber, Talking Tom, Cool Reader, etc.), use the tips from this manual. And if the problem is with system ones, which often appear on the screen and do not allow you to interact with Android, I advise you to additionally read the recommendations for elimination using the links provided. From the list, select which applications are causing the problem:
In addition, system applications are connected to each other, which means that an error in one can affect another. So, for example:
I also want to note that the cause of all the troubles may be a third-party, unoptimized program recently installed (or recently used/updated) on the device.
From my experience, I will say. The error pointed to any application, but not the one that was the culprit. This malware turned out to be a constantly updated “news feed” that “devoured” the smartphone’s resources and prevented the normal operation of all other programs.
It is necessary to carry out a set of technical procedures, which in 90% of cases help solve the problem.
First try clearing the cache of the application that is throwing the error. This is done in the settings:
Check functionality.
Rolling back to its original state may also help (if it is a pre-installed application):
Check to see if the problem is resolved. If this is the case, I recommend not updating the application for a while until a new update is released.
For user-installed programs, try a normal reinstallation (that is, uninstall and install). Then check if everything is in order.
Important! If the error prevents you from interacting normally with the interface, go to and follow the specified procedures.
If the problem is in the application, clear the cache and reset them to their original state.
Perhaps some observations will help give you an idea in solving the problem:
Couldn't solve the problem? Describe it in detail in the comments. Together we will try to find a way out of the situation.
Many users have recently begun to receive problematic notifications on their Android. When you start broadcasting, try to record a screen video, or simply connect a USB cable, a message pops up: An error occurred in the System Graphical Interface application. Today we will talk about this graphical option, and also show what to do to fix the bug.
Error notification in the GUI.
The system graphical interface is a set of system options and applications responsible for graphically displaying user actions on the screen (menus, icons, buttons, various lists). GIS is connected to almost the entire Android OS shell, so localizing problems that occur with it can be very difficult. Basically, the error occurs due to:
After the error window pops up, the phone starts to slow down terribly and may freeze on a black screen. Moreover, the failure does not depend on the device model (Huawei, LG, Lenovo, Asus, Fly, HTC).
To fix the problem “An error has occurred in the System Graphical Interface application,” you should perform and check several points, which we will discuss below.
Let us immediately note that we apply the described tips on Android, where the latest updates are installed, it is checked for viruses and cleaned of residual system garbage and cache: